Industry News
DIP switch welding and cleaning process
Release date:2015-07-18 Views 255
DIP switch welding and cleaning process:
1. KE DIP switch at all during the operation, make sure the switch in the "off" position.
2. Wave soldering: Recommended solder temperature at 500 ° F (260 ℃), up to 5 seconds.
3. Hand soldering: Use 30-watt soldering iron temperature control at 608 ° F (320 ℃), welding time is approximately 2 seconds.
4. The cleaning process: use of ultrasonic cleaning method can give better results when using the steam mode, the temperature should not exceed 51 ℃.
Prev:DIP SMD switch DIP switch
Next:DIP switch algorithm system
1. KE DIP switch at all during the operation, make sure the switch in the "off" position.
2. Wave soldering: Recommended solder temperature at 500 ° F (260 ℃), up to 5 seconds.
3. Hand soldering: Use 30-watt soldering iron temperature control at 608 ° F (320 ℃), welding time is approximately 2 seconds.
4. The cleaning process: use of ultrasonic cleaning method can give better results when using the steam mode, the temperature should not exceed 51 ℃.
Prev:DIP SMD switch DIP switch
Next:DIP switch algorithm system
